Call Forwarding - Samsung OfficeServ SMT-i5243 User Manual

OfficeServ 7030
TECHNICAL MANUAL

1.4 CALL FORWARDING

The OfficeServ 7030 allows the system administrator to program the call forward destinations
for other station users. This MMC also allows call forward to be set after the destination has
been entered.
The OfficeServ 7030 system allows six types of call forwarding. There is an option, FORWARD
BUSY/NO ANSWER, that allows both busy and no answer to be activated at the same time,
provided that destinations have been entered for both. The destinations for all these forwards
can be either an internal number or an external number.
0 = FORWARD CANCEL
1 = ALL CALL
2 = BUSY
0 = FORWARD CANCEL
1 = ALL CALL
2 = BUSY
3 = NO ANSWER
4 = BUSY/NO ANSWER
5 = FWD DND
6 = FOLLOW ME
3 = NO ANSWER
4 = BUSY/NO
5 = FORWARD DND
6 = FOLLOW ME
This option will cancel any call forwarding set
will not remove the programmed destination and will not
override any preset forward settings
This option, when set, will forward all calls to the
programmed destination. If the programmed destination is a
station then that station can call the forwarded station to put
calls through.
This option, when set, will forward calls to the programmed
destination when the forwarded keyset is busy.
This option, when set, will forward calls to the
programmed destination if the forwarded station does
not answer a call before the forward no answer timer
MMC 502 expires.
This option will activate both the BUSY option and the NO
ANSWER option at the same time.
This option will forward all calls to the programmed
destination whenever the forwarded station goes into DND.
This option will forward all calls from another station to this
one.
1.6
USER INSTRUCTIONS
PART 1 MAY 2010
ANSWER
in MMC
in MMC 316.
Home Page
102. It
in