Samsung OfficeServ SMT-i5243 User Manual page 392

- To show Caller ID Number dial 1.
- To show Caller ID Name dial 2.
- To show the DID Number the call came in on dial 3.
- To show the Name of the DID the call came in on dial 4.
- To show the Name of the Group the call came in for dial 5.
- To show the DID Number and then Name of the DID dial 6.
- To show the Name of the DID and then the DID Number dial 7.
• To set the top line of the display shown after answering a call dial 2.
Set the data to display from the following:
- To show Caller ID Number dial 0.
- To show Caller ID Name dial 1.
- To show the DID Number the call came in on dial 2.
- To show the Name of the DID the call came in on dial 3.
- To show Caller ID Number and then the DID Number dial 4.
- To show Caller ID Name and then the DID Number dial 5.
- To show the DID Number and then the name of the DID dial 6.
- To show the Name of the DID and then the DID Number dial 7.
- To show the C.O. line information dial 8.
• To set the format if the C.O. line information when the above is set to show C.O.
line information dial 3.
- To show the C.O. line number and the dialed or Caller ID Number dial 0.
- To show only the dialed or Caller ID Number dial 1.
• Press TRANSFER to exit and store your selection.
VIEWING THE NEXT CALLER ID CALL
In the event that you have a call waiting or a camped-on call at your keyset, you
can press the NEXT button to display the Caller ID information associated with
the call in queue at your keyset. Either the CID name or CID number will show in
the display depending on your Name/Number selection.
To view Caller ID information for calls that have been camped-on to your keyset,
press the NEXT button. If your keyset does not have a NEXT button, press the CID
button and then the NEXT soft key.
SAVING THE CALLER ID NUMBER
At any time during an incoming call that provides CID information, you may press
the SAVE button to save the CID number. If your keyset does not have a SAVE but-
ton, press the CID button, the SCROLL button and then the SAVE soft key.The sys-
tem must be using LCR to dial the saved number.
60
REDIALING A SAVED CALLER ID
NUMBER
To redial a number that has been saved, press the SNR button or dial 17.
NOTES:
1. Your telephone system must have LCR correctly programmed to redial the
saved number.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
STORING A CALLER ID NUMBER
At any time during an incoming call that provides CID information, you may save
the CID number as a speed dial number in your personal speed dial list. To store a
Caller ID number in a personal speed dial bin:
• Press the STORE button. The system displays the speed dial bin in which the
number was stored, OR
• Press the CID button and then press the SCROLL button.
• Press the STORE soft key.
• The system displays the speed dial bin in which the number was stored.
NOTE: Your telephone system must have LCR correctly programmed to redial the
saved number. If LCR is not being used on your system, you will not be allowed to
STORE CID numbers.
INQUIRE CALLER ID PARK/HOLD INFO
If you are informed that an incoming call is on hold or has been parked for you,
you may view the Caller ID information before you retrieve the call.This may influ-
ence how you choose to handle the call.
From an idle keyset:
• Press the INQUIRE button, OR
Press the CID button and then the INQUIRE soft key.
• Dial the trunk number.
• You may now answer the call by pressing the ANS button, OR
You may use NND to view more information about this call, OR
You can return to the idle condition by pressing IGNORE.
Home Page
61