Wcs Integrated Type - NEC NEAX 2000 IPS Manual

WCS Integrated Type

General Description
This feature allows a system to have Wireless PBX feature. The system provides several integrated features add-
ing on the adjunctive configuration.
Configuration Application
Integrated Type
Operating Procedure
To place a call using Quick Dialing:
1. Press the L1 key and receive extension dial tone.
2. Dial the desired number and receive ringback tone.
To place a call using Preset Dialing:
1. Dial the desired number, press the L1 key, and receive ringback tone.
To place an outside call using Quick Dialing:
1. Press the L1 key and receive extension dial tone.
2. Dial the trunk access code.
3. Receive outside dial tone.
4. Dial the desired outside number and receive ringback tone.
To place an outside call using Preset Dialing:
1. Dial the trunk access code and the desired outside number, press the L1 key, and receive ringback tone.
To send the DTMF signal:
1. While engaged in a call, press any dial key. DTMF signal is automatically sent from the WCS to the other
party.
* Refer to the description of the feature, DTMF Signal Sender.
To place a call on Consultation Hold:
1. While engaged in a call, press the TRF key and receive Feature Dial Tone. The called party hears Music on
Hold, if the PBX provides the service.
Page 46
Issue 6
WCS Integrated Type
ND-91638-007(E)