NEC NEAX 2000 IPS Manual page 121

H
CM67 NOTE 3: When using the IP-PAD card with CODEC/IP-PAD channel without CODEC for the loca-
tion number of IP-CS, specify the IP-PAD group number by CM67 Y=18 and specify the
priority of the IP-PAD channel by CM67 Y=19.
1. Assign the IP-PAD group number for each location number for IP-CS (assigned by
CMAD Y=29) by CM67 Y=18.
2. Confirm whether there is an IP-PAD channel that uses 16VCT in the IP-PAD group as-
signed by CM67 Y=18. Assign the priority of the IP-PAD channel by CM67 Y=19 to
specify the IP-PAD channel automatically.
• When all IP-PAD channels are used, the system restricts the connection.
• IP-PAD channels will be periodically used from younger number.
I
DESCRIPTION
Give priority to IP-PAD Give priority to IP-PAD
channel without 16VCT channel with 16VCT
(CM67 Y=19>00-63:00) (CM67 Y=19>00-63:01)
Is there
any IP-PAD
channel without
16VCT
in the IP-PAD
group?
Yes
No Yes
Is there
any IP-PAD
channel with
16VCT
in the IP-PAD
group?
No Yes
Not use IP-PAD Use IP-PAD
channel channel with
16VCT
CHAPTER 3 SYSTEM DATA PROGRAMMING
Use only IP-PAD
channel without 16VCT
(CM67 Y=19>00-63:02)
Is there
Is there
any IP-PAD
any IP-PAD
channel with
channel without
16VCT
16VCT
in the IP-
in the IP-PAD
PAD group?
group?
No
No
Is there
any IP-PAD
channel without
16VCT
in the IP-
PAD group?
No
Yes
Use IP-PAD Not use IP-PAD
channel without channel
16VCT
– 111 –
CS DATA PROGRAMMING
DATA
Use only IP-PAD
channel with 16VCT
(CM67 Y=19>00-63:
NONE)
Is there
any IP-PAD
channel with
16VCT
in the IP-
PAD group?
Yes No Yes
Use IP-PAD Use IP-PAD
channel without channel with
16VCT 16VCT
NWA-008855-001 Rev.1.0
avch3001.fm