Group Call - Automatic Conference (6/10-Party) - NEC NEAX 2000 IPS Manual

Group Call - Automatic Conference (6/10-Party)

Group Call - Automatic Conference (6/10-Party)
General Description
This feature permits a PS user, D
ference among as many as six or ten parties. From a PS/D
be paged simultaneously except the conference leader. The PSs are assigned through system data as participants
in the paging groups.
Configuration Application
Integrated Type
Operating Procedure
To make a conference call:
term
From PS/D /Single Line Telephone;
1. Press the Speaker/L1 key or go off hook, and receive a dial tone.
2. Dial the access code or press feature key (D
tone.
OR
From PS only;
1. Dial the access code for a desired paging group.
2. Press the L1 key and receive a ringback tone.
If the CFT trunks are all busy or the leader is not assigned as the conference leader with service feature class,
a reorder tone is heard.
3. You can converse sequentially with the participants of the conference in order of their answering.
To answer the paging:
1. When the conference call terminates, the LCD shows the station number of the conference leader.
2. Answer the ringing of paging from the conference leader.
3. You can converse with the conference leader and other participants.
To participate in the middle of the conference:
term
From PS/D /Single Line Telephone;
1. Press the Speaker/L1 key or go off hook, and receive a dial tone.
2. Dial the access code or press feature key (D
OR
From PS only;
1. Dial the access code for re-participation to the paging group.
2. Press the L1 key.
If the CFT trunks are all busy, a reorder tone is heard.
3. You can participate in the conference if the CFT trunk has an idle circuit.
Page 16
Issue 6
term
user or Single Line Telephone user within the system to establish a con-
term
only) for a desired paging group, and receive a ringback
term
only) for re-participation to the paging group.
ND-91638-007(E)
term
/Single Line Telephone, a maximum of 9 PSs can