NEC NEAX 2000 IPS Manual page 214

Service Conditions
1. A maximum of nine stations is paged simultaneously except the conference leader.
Even if more than nine stations are assigned to one group except the leader, the first nine stations are paged
in order of registered number on the system data.
2. Single Line Telephones, D
tual line cannot be assigned). A station can belong to plural groups.
3. Up to eight groups can be assigned as the conference group by system data.
4. The maximum number of participants which can be connected in a conference is:
• Six participants (including of the leader)
• Ten participants (including of the leader)
Up to four CFT trunks can be accommodated in the system.
The maximum number of conference groups per system when using four CFT trunks (maximum) is:
• Four, 6-party conference groups
• Two, 10-party conference groups
• Two, 6-party conference groups and one, 10-party conference group
A CFT trunk is used for either a 6-party or 10-party conference. Dialed access codes determine which CFT
trunk is used for a conference. If the leader dials the access code or press the feature key for a 10-party con-
ference when only one CFT trunk is idle, the leader is restricted and hears the reorder tone.
5. A Single Line Telephone, D
even if it does not belong to the group.
6. A Single Line Telephone, D
ference by dialing the re-participation access code or by pressing the feature key (D
trunk has an idle circuit.
7. A conference leader cannot page two or more groups simultaneously.
A group cannot be paged simultaneously by the multiple conference leaders.
A group cannot be paged while a conference of the group is in progress.
8. If all stations within the paged group are busy, the conference leader hears the reorder tone.
If a station does not answer the paging by certain time (which is determined by the system data), the con-
ference leader hears the busy tone.
9. When a station cannot answer a page because it is out of the cell, the page timed out, or because the station
is busy, the station can still participate in the conference. It does this by dialing the re-participation access
code or by pressing the feature key (D
has an idle circuit.
10. If a conference leader left from the conference once, he/she can participate again by dialing the re-partici-
pation access code or by pressing the feature key (D
the CFT trunk has an idle circuit.
11. A station can be paged while it is idle. When the station is busy at the time of paging, the station cannot be
paged even if the station returns to idle later.
12. Even if a station sets Call Forwarding, the conference leader can page the station.
13. If a paged PS is out of cell or if its power is off, the system keeps paging it for a period of time.
While the paging is in progress, the PS can be paged when it returns into the cell or when its power is turned
on.
Group Call - Automatic Conference (6/10-Party)
term
s and PSs can be assigned as the stations within the conference groups (Vir-
term
and PS can be a conference leader and make a conference call to a group,
term
and PS, which does not belong to the group, can be a participant in a con-
term
only) while the conference is in progress and when the CFT trunk
ND-91638-007(E)
term
only) while the conference is in progress and when
term
only), when the CFT
Page 17
Issue 6