NEC NEAX 2000 IPS Manual page 116

C
CMAD Register the MAC Address of the IP-CS.
NOTE:
Register the MAC Address printed
on the back side of IP-CS. When this
data is not set, IP-CS does not start
up.
Specify whether Master IP-CS, Submaster IP-
CS or Slave IP-CS for wireless synchroniza-
tion between IP-CSs.
Assign the location number for each IP-CS.
Assign the Wireless Block Number for each
IP-CS.
NOTE: Set the same wireless block number
for the group of IP-CS whose radio
zone overlaps directly or indirectly
each other.
CMAE Assign the synchronizing destination SYS-ID
that is given priority.
NOTE: Set CMAE Y=22 when the Master
IP-CS synchronizing with an IP-CS/
legacy CS that has different SYS-ID
from the Master IP-CS including a
cell station locally provided by cus-
tomer.
D
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=27
(1) 000-255: CS No.
(2) XXXXXXXXXXXX: MAC Address
• Y=28
(1) 000-255: CS No.
(2) 0
1
2
NONE : Slave IP-CS
• Y=29
(1) 000-255: CS No.
(2) 00-63
NONE : Location No. 00
• Y=30
(1) 000-255: CS No.
(2) 00-09
NONE : Wireless Block No. 00
• Y=22
(1) 00-09:Wireless Block No. set by CMAD
Y=30
(2) XXXXXXXXX: Destination SYS-ID for
– 106 –
CS DATA PROGRAMMING
DATA
: Master IP-CS
: Submaster IP-CS
: Slave IP-CS
: Location No.
: Wireless Block No.
Clock Synchronization
(9 digits decimal)
NWA-008855-001 Rev.1.0
avch3001.fm