NEC NEAX 2000 IPS Manual page 141

A
CM41 Specify the duration of message for An-
nouncement-PS No Answer.
Specify the duration of message for An-
nouncement-PS Out of Cell/PS Power Off.
Specify the message reply timer for An-
nouncement-PS No Answer.
NOTE: CM41 Y=0>01 is effective only
when CM08>085 is set to 0.
Specify the message reply timer for An-
nouncement-PS Out of Cell/PS Power Off.
CM48 Provide the Announcement Service.
CM49 Assign the function for each Digital An-
nouncement Trunk.
B
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=0
(1) 75
(2) 01-99: 4-396 seconds
If no data is set, the default setting is 116-120
seconds.
• Y=0
(1) 84
(2) 01-99: 4-396 seconds
If no data is set, the default setting is 116-120
seconds.
• Y=0
(1) 86
(2) 01-99: 4-396 seconds
If no data is set, the default setting is 36-40 sec-
onds.
• Y=0
(1) 85
(2) 01-99: 4-396 seconds
If no data is set, the default setting is 8-12 sec-
onds.
• Y=5
(1) 00: PS No-Answer
02: PS Out of Cell/PS Power Off
(2) 0500: To provide
• Y=00
(1) 002-127: Digital Announcement Trunk
(2) 1300-1363: PS No Answer Message Group
1500-1563: PS Out of Cell/PS Power Off
– 131 –
WCS FEATURE PROGRAMMING
DATA
(4 second increments)
(4 second increments)
(4 second increments)
(4 second increments)
Card No. (EB002-EB127)
No. 00-63
Message Group No. 00-63
NWA-008855-001 Rev.1.0
avch3001.fm