Multi-Line Operation - Ps - NEC NEAX 2000 IPS Manual

Internet protocol server wcs system manual (phs) (for series 3300 or later)
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

General Description
PS equipped with two line keys, L1 key and L2 key, and different station numbers can be assigned to each of
two lines. The number assigned to L1 key of the PS is called My Line and the other number assigned to L2 key
is called Sub Line. My Line and Sub Line of a PS can be assigned to appear on the Flexible Line Keys of a D
term
and the D
can share the PS lines.
Configuration Application
Integrated Type and Adjunct Type
Operating Procedure
Refer to the PHS Handset II User's Guide.
Service Conditions
1. A Sub Line number of PS cannot be overlapped with station numbers of My Line/Sub Line of D
and My Line of PS, but the same Sub Line number of PS can be assigned to multiple PSs.
2. There is no limitation in the number of PS which can share a Sub Line.
3. Some PBX services are available for My Line as well as for subline, but some of the services such as "Mes-
sage Waiting" are not available to subline.
4. When a call terminates to a Sub Line, all PSs sharing the Sub Line ring and each L2 key of the PSs lights
for 60 seconds. If one of those PSs originates or holds on the Sub-Line call, each L2 key of other PSs does
not light.
5. While either My Line or Sub Line is in communication, Multiline Hold is available by pressing HLD key
and other PSs/D
Exclusive Hold is available by pressing HLD key twice and only the PS on Exclusive Hold can answer the
call. Other PSs receive ROT and cannot answer the call.
6. While either Sub Line or My Line is in communication, the PS user can do any of the following by pressing
HLD key and the other line key:
answer an incoming call
answer a call on Multiline Hold
originate an outgoing call on the other line
If the PS user answers the second line without pressing HLD key, the first line is disconnected.
7. Handover on Sub Line is available as well as the My Line.
8. When a call is terminating to a Sub Line which is not set Announcement - PS No Answer/ - PS Out of Cell,
paging continues for 60 seconds, then stops.

Multi-Line Operation - PS

term
s sharing the line can answer by pressing the held line key.
ND-91638-007(E)
Multi-Line Operation - PS
term
term
, SLT,
Page 23
Issue 6

Advertisement

Table of Contents
loading

Table of Contents