Calling Number Display - Ps - NEC NEAX 2000 IPS Manual

Calling Number Display - PS

Calling Number Display - PS
General Description
This feature provides a display on the LCD of a PS receiving a call, indicating the station number.
Configuration Application
Integrated Type and Adjunct Type with CCIS interface
Operating Procedure
No manual operation is required.
Service Conditions
1. For internal or CCIS incoming calls, the calling extension number will be displayed. For trunk calls, the
calling subscriber's number for ANI and the calling ISDN terminal number will be displayed. The trunk
number cannot be displayed.
2. A maximum of 11 digits of the calling number can be displayed.
3. When an incoming call terminates to a PS and begins ringing, the calling number will be displayed (no
flashing) and when the line is connected, the call duration will be displayed. Once the display is cleared by
pressing a Feature key (F1/F2/F3), the number will not be displayed again.
Page 14
Issue 6
ND-91638-007(E)