Announcement - Ps No Answer / Announcement - Ps Out Of Cell - NEC NEAX 2000 IPS Manual

Announcement - PS No Answer /
Announcement - PS Out of Cell
General Description
This feature allows calls to a PS that cannot be paged in a predetermined period of time to be routed to an an-
nouncement. The announcement notifies the calling party that the PS cannot answer. Announcements can be
divided between Announcement-PS No Answer and Announcement - PS Out of Cell depending on the PS con-
dition.
Configuration Application
Integrated Type and Adjunct Type
Operating Procedure
By dialing predetermined access code from a station or a PS
To replay an announcement:
1. Dial the access code to replay the announcement assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the L1 key.
4. Receive a message.
5. Press END key.
To record an announcement:
1. Dial the access code to record the announcement assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the L1 key.
4. Receive three (3) seconds of service set tone.
5. Record a message.
6. Press END key.
To delete an announcement:
1. Dial the access code to delete the announcement assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the L1 key.
4. Receive three (3) seconds of service set tone.
5. Press END key.
Note: An announcement may be a maximum of 120 seconds long.

Announcement - PS No Answer / Announcement - PS Out of Cell

Note
ND-91638-007(E)
Page 3
Issue 6