Multi-Line Operation-Ps - NEC NEAX 2000 IPS Manual

Multi-Line Operation-PS

To provide this feature, the BISON type PS, and BS21A, BS31 or BS301 are required.
START
CM1C Assign a subline PS station number to the Vir-
tual PS LEN.
CM1D Assign the subline PS station number to each
primary PS station.
Specify the Terminal type of PS as 0.
Specify the kind of PS station as subline PS.
CM12 Provide the multi-line function to the Virtual
station number for the primary PS and subline
PS.
CMAE Set the Control Signal Mode of the Calling
Area as Crowded Mode.
CM14 Assign the Virtual station data for the sub line
PS as same as the primary PS.
CM5A See "VIRTUAL STATION DATA
PROGRAMMING".
A
DESCRIPTION
CSH INITIAL
Page 121
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 000-511: Virtual PS LEN
(2) X-XXXXXXXX: Subline PS Station No.
• Y=01
(1) X-XXXXXXXX: Primary PS Station No.
(2) X-XXXXXXXX: Subline PS Station No.
• Y=14
(1) X-XXXXXXXX: Primary/Subline PS Sta-
(2) 0: PHS
• Y=16
(1) X-XXXXXXXX: Subline PS Station No.
(2) 0: Subline PS
• Y=05
(1) X-XXXXXXXX: Virtual Station No.
(2) 0: Provided
• Y=10
(1) 00-31: Calling Area No.
(2) 02: Crowded Mode
– 146 –
WCS FEATURE PROGRAMMING
DATA
downloaded (CM1C)
assigned by CM1C
tion No. assigned by
CM1C
assigned by CM1C
assigned by CM14
NWA-008855-001 Rev.1.0
avch3001.fm