Station Hunting - Not Available - NEC NEAX 2000 IPS Manual

Station Hunting - Not Available

General Description
This feature allows a call placed to a PS station which is out of cell or power off to be forwarded to an idle station
in a hunt group. Two Station Hunting arrangements are available.
Station Hunting - Circular processes the call regardless of which station in the hunt group is called.
Station Hunting - Terminal initiates a hunt only when the pilot number of a hunt group is called.
TRK
Station 200
In the above example (Station Hunting - Terminal) Station Number 200 dials Pilot PS Station Number 500. The
call is not answered because the PS 500 is out of cell or its power is off. Forward the call to the idle station in
the hunt group. The call will be terminated to PS Station Number 502 in above.
Configuration Application
Integrated Type.
Operating Procedure
No manual operation is required.
Service Conditions
1. PS out of cell or power off will be revealed by timeout of PS - Not available's programmable timer. After
the timeout, another PS will be called.
2. When a station in the hunt group is busy or sets Call forwarding - All Calls, Busy Line, No Answer, calls
already in the hunt process bypass the station and continue hunting.
3. If all stations in a hunt group are busy, busy tone will be heard.
Pilot Station
PBX
Number 500
Station 500
Out of cell,
Power off
Station 501
Dial 500
Busy
Station 502
Idle
ND-91638-007(E)
Station Hunting - Not Available
Time out for PS-Not Available
Hunting is proceeded and a call is
placed to other station in a hunt group
Page 41
Issue 6