NEC NEAX 2000 IPS Manual page 138

To send all digits dialed by a station from COT:
E
CM20 Assign the access code for LCR Group 3.
CM8A Assign an Area Code Development Pattern
number to LCR Group 3.
Assign a Route Pattern number to each area
code for Area Code Development Pattern
number 0.
Specify the 1st order of LCR selection for
Route Pattern number 000.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
TRUNK DATA PROGRAMMING (For Adjunct Analog)
• Y=0
(1) X-XXXX: Access Code
(2) A129: LCR Group 3
• Y=A000
(1) 3: LCR Group 3
(2) 4000: Area Code Development Pattern No.
0
• Y=4000
(1) X...X: Area Code 1-8 digits
(2) 0000: Route Pattern No. 000
• Y=0000
(1) 1: 1st order of LCR selection
(2) 000 ZZ
ZZ: 00-63: Trunk Route No.
– 128 –
DATA
NWA-008855-001 Rev.1.0
avch3001.fm