Ps Location Indication - NEC NEAX 2000 IPS Manual

PS Location Indication

START
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Allow PS Location Indication in Service Re-
striction Class A for PS.
Allow PS Location Indication in Service Re-
striction Class A for D
CM08 Provide the ATTCON/DESKCON with PS
Location Indication.
CM77 Enter the CS name to each CS number by
CM77 Y=8 or CM77 Y=9.
NOTE 1:
NOTE 2:
END
DESCRIPTION
term
.
The maximum number of characters per CS is 16, including spaces.
There are two ways to change a name that is currently programmed. (1) Overwriting with
new name, or (2) inserting a blank space as the first character will cancel the existing
name.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=02
(1) X-XXXXXXXX: Station No.
For PS: Virtual Station No. assigned by
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=148
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
• Y=149
(1) 00-15: Service Restriction Class A
(2) 0: Allow
(1) 521: PS Location Indication
(2) 0 : To provide
1 : Not provided
• Y=8 By Character
(1) 000-255: CS No.
(2) Character Code 20-7F: Maximum 32 digits
See Character Code Table.
Page 141
• Y=9 By Character
(1) 000-255: CS No.
(2) A-Z, 0-9: Character
Maximum 16 characters
– 150 –
WCS FEATURE PROGRAMMING
DATA
CM14
assigned by CM12 Y=02
assigned by CM12 Y=02
NWA-008855-001 Rev.1.0
avch3001.fm