NEC NEAX 2000 IPS Manual page 145

A
CM08 Specify that the RBT is not sent when the
called PS is out of cell or the power is off.
NOTE:
CM41 Specify the timer for a distinction whether the
called PS is out of cell/power is off, or not.
CME6 When setting the destination of Call Forward-
ing-PS Out of Cell from MAT/CAT, set the
destination to the Virtual station number as-
signed by CM14.
END
NOTE:
When setting the Digital Announcement Trunk (DAT) as the destination of Call Forwarding-PS
Out of Cell, set the data for
Page 130
DESCRIPTION
CM08>503 is effective only for Sta-
tion-to-Station call.
"Announcement-PS No Answer/Announcement-PS Out of
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 503
(2) 0: Not sent
• Y=0
(1) 85
(2) 01-99: 4-396 seconds
If no data is set, the default setting is 8-12 sec-
onds.
• Y=06
(1) X-XXXXXXXX: Virtual Station No. as-
(2) Destination No.:
X-XXXXXXXX: Station No.
E000: Attendant Console
YY...Y: Outgoing Trunk Access Code (1-4
– 135 –
WCS FEATURE PROGRAMMING
DATA
(4 second increments)
signed by CM14
,
digits) + + Called No. (Maxi-
mum 26 digits)
NWA-008855-001 Rev.1.0
Cell".
avch3001.fm