NEC NEAX 2000 IPS Manual page 234

Internet protocol server wcs system manual (phs) (for series 3300 or later)
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

■ To dial before placing the PS off-hook
term
1. Place the D
SP30 off-hook.
2. Dial a desired station number 2000 from the D
or member buttons.
3. Place the PS off-hook, after dialing all digits from the D
4. The station answers to start conversation (3000 is displayed on the LCD of the station as a calling number).
term
Note 1: Only the D
Note 2: Only the PS can cancel operation of step 3 and later or end conversation. (Operation from the D
SP30 is disabled.)
■ To originate a call using a trunk key/Sub Line key
1. Press a trunk key/Sub Line key registered in the D
2. Place the PS off-hook (hear dial tone).
3. Dial a destination number from the PS.
Note 1: Place the PS off-hook within 10 seconds after pressing a trunk key/Sub Line key.
Note 2: When originating a call using a Sub Line key, the station number of the Sub Line is notified to the called
party.
To answer a call
■ To answer a call to D
term
1. A station dials D
term
2. Both of the D
3. The PS answers to start conversation.
term
Note: D
SP30 cannot answer the incoming call.
■ To answer a call to a trunk key/Sub Line key
1. Press the trunk key/Sub Line key where a call is terminated.
2. Place the PS off-hook to start conversation.
Note 1: Place the PS off-hook within 10 seconds after pressing a trunk key/Sub Line key.
Note 2: When terminating a call to My Line, a call terminated to the trunk key/Sub Line key cannot be an-
swered.
Note 3: In order to answer with a trunk key, the trunk termination method must be "Trunk Line Appearance"
or "TAS".
To hold a call in progress
1. Conversation is in progress with a station or CO line/tie line.
2. Press the Hold button on the D
3. Hear service set tone from the PS.
4. The PS is released.
Note 1: Exclusive Hold is disabled.
Note 2: In the case of hold on a trunk, the call is held on the trunk key when the trunk is registered in a function
key. The call is held on My Line key when the trunk is not registered in a function key.
SP30 can cancel dialing in step 2. (Operation from the PS is disabled.)
term
SP30
SP30 station number 3000.
SP30 and PS ring.
term
SP30.
term
SP30, or select from the address book button, call logs,
term
SP30.
term
SP30.
ND-91638-007(E)
Soft Phone Wireless Handset
term
Page 37
Issue 6

Advertisement

Table of Contents
loading

Table of Contents