Individual Ps Calling - NEC NEAX 2000 IPS Manual

Individual PS Calling

General Description
This feature allows the calling party to page the individual PS.
Configuration Application
Integrated Type and Adjunct Type
Operating Procedure
To activate:
1. Dial the unique number assigned to each PS. The designated PS will be called. If the calling number display
is available, the lower 11 digits of the number are displayed on the LCD of the called PS.
2. There are two answering options:
a. Any-key answering mode
The called PS user presses any one of the keys (numbers 0 to 9, #, *, or function keys) to answer.
b. Automatic answering mode
The called PS is connected automatically without ringing.
Service Conditions
1. The PS will be paged in the paging area where its location has been registered.
2. This feature is available for:
a. calls from a PS
b. calls from a PBX station (D
c. Direct-In Termination (DIT) calls
d. Direct Inward Dialing (DID) calls
e. Direct Inward System Dialing (DISA) calls
f. Tie Line calls.
3. If the PS cannot be called because the PS user is out of the service area, the announcement can be provided
to the calling party (The Digital Announcement Trunk card is required.). If the called PS is out of the service
area, Out of Cell Indication is activated.
4. When all speech channels of the CS in the paging area are busy, Announcement - PS Out of Cell is activated,
if allowed in the tenant basis service feature class. If not allowed in the service feature class, the PS user
receives reorder tone.
5. PS Authorization is activated for every call termination.
6. The answering options, the any-key answering mode, and the automatic answering mode can be selected by
the PS user, using the FNC key.
Page 22
Issue 6
Individual PS Calling
term
, Single Line Telephone) or Attendant Console
ND-91638-007(E)