Initial Set Up For Ip-Cs - NEC NEAX 2000 IPS Manual

Initial Set Up for IP-CS

START
CM05 Assign an AP number to the Virtual CSH.
When the IP-CS is accommodated in a remote
site, assign a site number and PIM (Physical
PIM/Virtual PIM) number.
Assign the accommodation type of AP to the
AP number assigned by CM05 Y=0.
NOTE 1:
NOTE 2:
When the IP-CS is accommodated to the re-
mote site, assign the type of AP as the Virtual
CSH.
CM08 Specify NEAX 2000 IPS specification as the
DTG (Digital Tone Generator) for IP-CS.
A
DESCRIPTION
When the IP-CS is accommodated to
the main site, assign the second data
"0" (Virtual CSH).
When the IP-CS is accommodated to
the remote site, assign the second
data "1" (Remote Site).
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=0
(1) 04-15, 20-59: AP No.
INITIAL
(2) 29: Virtual CSH
• Y=8
(1) 04-15, 20-59: AP No.
(2) XX 99
XX
INITIAL
NONE : Main Site
• Y=6
(1) 04-15, 20-59: AP No.
(2) 0: Virtual CSH
INITIAL
1: Remote Site
• Y=7
(1) 04-15, 20-59: AP No.
(2) 0 : Virtual CSH
3 : AP card
INITIAL
(1) 531
(2) 0: NEAX 2000 IPS specification
– 103 –
CS DATA PROGRAMMING
DATA
: 01-31: Remote Site No.
NWA-008855-001 Rev.1.0
avch3001.fm