NEC NEAX 2000 IPS Manual page 150
Internet protocol server wcs system manual (phs) (for series 3300 or later)
Hide thumbs
Also See for NEAX 2000 IPS:
- Command manual (1038 pages) ,
- Installation manual (619 pages) ,
- System manual (448 pages)
Table of Contents
Advertisement
• To display an ATTCON number for PS-display, do the following programming.
START
CM60
Assign the ATTCON number for PS-display to
the ATTCON number assigned by CM14/
CM10.
NOTE:
To call the destination by a calling
name/number display feature easily,
we recommend the access code for
operator call assigned by CM20 to
be set to the second data.
CM20
Assign the access code for an operator call.
Assign the access code for Individual Atten-
dant Access.
Assign the access code for Priority Calls 0 and
1 respectively.
Assign the access code for Special Operator
Call 0-3 respectively.
Assign the access code for Emergency call.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
•
Y=51
(1)
0-7: ATTCON No. assigned by CM14/
CM10
(2)
X-XXXXXXXX: ATTCON No. for PS-
•
Y=0-3 Numbering Plan Group 0-3
(1)
X-XXXX: Access Code
(2)
800: Operator Call
•
0-3 Numbering Plan Group 0-3
(1)
X-XXXX: Access Code
(2)
A095: Individual Attendant Access
•
Y=0-3 Numbering Plan Group 0-3
(1)
X-XXXX: Access Code
(2)
A088: Priority Call 0
A089: Priority Call 1
•
Y=0-3 Numbering Plan Group 0-3
(1)
X-XXXX: Access Code
(2)
A090-A093: Special Operator Call 0-3
•
Y=0-3 Numbering Plan Group 0-3
(1)
X-XXXX: Access Code
(2)
A094: Emergency Call
– 140 –
WCS FEATURE PROGRAMMING
DATA
Display
NWA-008855-001 Rev.1.0
avch3001.fm
Advertisement
Table of Contents
