NEC NEAX 2000 IPS Manual page 120

G
CM67 Specify the Type of Service (TOS) field prece-
dence of the control packet for the IP-CS-to-
system to each location number.
NOTE:
The TOS between the IP-CS and the
system is determined by this data
setting.
Specify the DiffServ Code Point (DSCP) of the
control packet for IP-CSs to each location
number assigned by CMAD Y=29.
[Series 3200 R6.2 software required]
NOTE:
The TOS field precedence that is set
by CM67 Y=14 is invalid when this
data is set.
Assign the IP-PAD group number to the loca-
tion number assigned by CMAD Y=29.
[Series 3100 software required]
NOTE:
This data is available only for the
IP-PAD (PN-32IPLA/PN-32IPLA-
A).
Specify the priority of the IP-PAD channel to
the location number assigned by CMAD
Y=29. NOTE 2, NOTE 3
[Series 3100 software required]
NOTE 1: When no 16VCT card is mounted,
set the 2nd data to 00 or 02.
NOTE 2: When using only PN-8IPLA (IP-PAD) card in the system, follow the initial data setting.
When using PN-8IPLA (IP-PAD) card and PN-32IPLA/PN-32IPLA-A (IP-PAD) card in
the system, you must not set the second data to 02 (use only IP-PAD channel without
16VCT). PN-8IPLA card is equal to the IP-PAD channel with 16VCT.
H
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=14
(1) 00-63: Location No. assigned by CMAD
Y=29
(2) 00-7
NONE : 6
• Y=15
(1) 00-63: Location No. of group
(2) 00-FF
NONE : C0
• Y=18
(1) 00-63: Location No.
(2) 00-31
NONE : IP-PAD Group No. 00
• Y=19
(1) 00-63: Location No.
(2) 00
01
02
NONE : Use only IP-PAD channel with
– 110 –
CS DATA PROGRAMMING
DATA
: PRECEDENCE 0-7 for control
packet
: DSCP of control packet for IP-
CS
: IP-PAD Group No.
: Give priority to IP-PAD channel
without 16VCT
: Give priority to IP-PAD channel
with 16VCT
: Use only IP-PAD channel with-
out 16VCT
16VCT
NWA-008855-001 Rev.1.0
avch3001.fm