Call Forwarding - Not Available - NEC NEAX 2000 IPS Manual

Call Forwarding - Not Available

Call Forwarding - Not Available
General Description
When a PS's power is off or it is out of cell, a call directed to the PS is forwarded to a VMS, and a voice mail
message can be recorded to the VMS and checked from the PS. Also the VMS can page the PS automatically
after the voice mail message is recorded.
Configuration Application
Integrated Type
Operating Procedure
To set Call Forwarding - Not Available:
1. Press L1 key and receive dial tone.
2. Dial access code and receive Service Set Tone.
OR
1. Dial access code.
2. Press L1 key and receive dial tone.
To cancel Call Forwarding - Not Available:
1. Press L1 key and receive dial tone.
2. Dial access code and receive Service Set Tone.
OR
1. Dial access code.
2. Press L1 key and receive dial tone.
To check a voice mail message from the PS by accessing the VMS:
1. Press L1 key.
2. Dial the VMS station number and receive ringback tone.
3. Follow the instruction given by the VMS.
To check a voice mail message from the PS by hearing Dial Tone, Special Dial Tone or Voice Guide:
1. Press L1 key and receive dial tone or Special Dial Tone.
Special Dial Tone:
Dial Tone:
Announcement:
2. Press End key.
To check a voice mail message by paging from the VMS (if provided by the VMS):
1. When a voice mail message is recorded, the VMS pages the PS automatically.
Page 6
Issue 6
Message exists.
No message exists.
Message exists.
ND-91638-007(E)