NEC NEAX 2000 IPS Manual page 227

PS Location Indication
6. CS Name can be assigned for CS Number 000 - 127 by CM77 Y=8 (Assigned by Character Code) or Y=9
(Assigned by Character). Max. 16 characters can be assigned as the CS name.
7. This feature has priority over Calling Name Display - PS feature. When both feature are assigned, the CS
name is displayed on the LCD of the D
term
8. When a D user makes/receives a call to/from a roaming PS, the CS name is not displayed on the LCD
term
of the D .
9. This feature is not available for data communications by PS.
10. When a PS in conversation with a D
CS name of the CS after handover.
11. When a PS user makes a call to a D
term
12. When a D user receives a call from a PS, a CS name is displayed (flashing) on the LCD of the D
term
When the D
display of date/time.
13. When a PS user makes a call to station-A, which sets Call Forwarding(-All Calls/ -Busy/ -No Answer) to
term
station-B (D
1) Name of the called station-A is displayed. (Refer to 14-3.)
2) When station-A is a PS, CS name of the called PS is not displayed. (Refer to 14-2.)
14. Examples of the LCD Display are described below.
term
14-1-1) When a D
the called D
Note 1: When a PS uses Multi-Line Operation and the PS user makes a call using L1(My Line: #200),
the display on the LCD of the D
Note 2: When a PS uses Multi-Line Operation and the PS user makes a call using L2(Sub Line: #200),
the display on the LCD of the D
term
14-1-2) When a D
term
ing D displays as follows:
Note 1: The Display on the LCD is same as 14-1-1, but the CS Name is displayed after the called PS
rings.
Note 2: When the call reaches to L2 (Sub Line: #200) of the PS, the CS Name is displayed after the
PS user answers the call.
Note 3: When the call reaches to L2(Sub Line: #200) of the PS that the PS name is assigned, the PS
name is displayed at the time the D
time the PS user answers the call.
Page 30
Issue 6
term
term
term
user answers the call, the name is displayed for 6 seconds (no flashing) then changes to the
), the LCD Display of the D
user receives a call from PS 200 that is connected to a CS named "Conf. Room #200",
term
displays as follow:
Conf. Room #200
user makes a call to PS 200 that is connected to CS named "Conf. Room #200", the call-
Conf. Room #200
or Attendant Console (the PS name is not displayed).
moves by handover, the CS name displayed will be changed to the
via CCIS, a CS name is not displayed on the LCD of the D
term
(station-B) will be as follows.
←PS number
200
←CS Name (1-16 characters)
term
will be same as above.
term
will be same as above.
←PS number
200
←CS Name (1-16 characters)
term
makes a call and it is changed to the CS name at the
ND-91638-007(E)
term
.
term
.