NEC NEAX 2000 IPS Manual page 147

To display the calling information on PS when a call is terminated from a station, do the following pro-
gramming in addition to the programming on
A
CM77 Enter the desired station user's name to each
station number by CM77 Y=0 or CM77 Y=1.
NOTE:
CM08 Specify the calling information displayed on
PS when a station calls a PS with consultation
holding the other station/trunk.
[Series 3500 software required]
END
DESCRIPTION
There are two ways to change a name that is currently programmed. (1) Overwriting with
a new name, or (2) inserting a blank space as the first character will cancel the existing
name.
CHAPTER 3 SYSTEM DATA PROGRAMMING
Page 136.
• Y=0 By Character Code
(1) X-XXXXXXXX: Virtual Station No. as-
(2) Character Code 20-7F: Maximum 32 digits
See Character Code Table.
• Y=1 By Character
(1) X-XXXXXXXX: Virtual Station No. as-
(2) A-Z, 0-9: Character
Maximum 16 Characters
(1) 555
(2) 0 : Information of holding call
1 : Information of calling station
– 137 –
WCS FEATURE PROGRAMMING
DATA
signed by CM14
Page 141
signed by CM14
(Station/Trunk information)
NWA-008855-001 Rev.1.0
avch3001.fm