User's Manual
Print Options
Overview
Before you can enter the Print Options Menu, there can be no images stored on the
current page.
To enter the Print Options Menu, press:
[Program]
[F2]
The system will display the following menu.
F1 INTERPOLATION
F3 TRIM OPTION
Interpolation Type
Replication, Bilinear, Cubic Spline 1 (normal) and Cubic Convolution 2 (edge
enhancing) are used to enlarge images to their maximum size, based on the selected
format. The No Magnification option prints images without enlarging them. The default
is Cubic Spline 1.
To change the interpolation type, press:
[Program]
[F2]
[F1]
The current interpolation type will be displayed and the system will prompt you to press
[F1] to display the next interpolation type.
When the desired interpolation type is displayed, press [E] on the numeric keypad to
remain in the Program Mode or press [Program] to specify the type and exit.
4–20
F2 BORDER OPTION
F4 CONTRAST OPTION
5B9615