3. Periodical check
[3]
3.5.10
Cleaning of the Area around the Waste Toner Collecting Port
[1]
3.5.11
Replacing the Ozone Filter
28
4. Clean the surface around the waste
toner collecting port.
☞ 28
5. Remove the Waste Toner Box from
its box, and remove the packing
material.
6. Set the Waste Toner Box [3] in place.
7. Close the Front Door.
NOTE
• Replace the Dust Filter/Cooling Fan
supplied with the Waste Toner Box
at the same time.
4038F2C543DA
1. Remove the Waste Toner Box.
☞ 27
2. Wipe the areas around the Waste
Toner Collecting Port [1] clean of
spilled toner and dirt using a soft
cloth dampened with water or alco-
hol.
4038F2C018DB
1. Holding onto the hook, remove the
Ozone Filter [1].
NOTE
• The Ozone Filter is supplied with
[1]
the Transfer Belt unit.
Replace it when replacing the
Transfer Belt Unit.
4038F2C019DA
Field Service Ver. 1.0 Jul. 2005