Tray1 Exit Section Misfeed; Job Tray Exit Section Misfeed (Js-601) - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
8.3.3

Tray1 Exit section misfeed

A. Detection timing
Type
Tray1 Exit section The 1st Tray Exit Sensor (PC1-FN) is not unblocked even after the lapse of a
misfeed detection given period of time after it has been blocked.
B. Action
1st Tray Exit Sensor (PC1-FN)
Step
1 Initial check items
2 PC1-FN I/O, sensor check
3 PWB-A FN replacement
8.3.4

Job Tray Exit section misfeed (JS-601)

A. Detection timing
Type
Job Tray Exit
The Job Tray Exit Sensor (PC19-FN) is not unblocked even after the lapse of a
section misfeed
given period of time after it has been blocked.
detection (JS-601)
B. Action
Job Tray Exit Sensor (PC19-FN)
Step
1 Initial check items
2 PC19-FN I/O, sensor check
3 PWB-A FN replacement
Relevant electrical parts
Action
Relevant electrical parts
Action
Description
Control Board (PWB-A FN)
WIRING DIAGRAM
Control signal
—
PWB-A FN PJ19A-6 (ON)
—
Description
Control Board (PWB-A FN)
WIRING DIAGRAM
Control signal
—
PWB-A FN PJ14A-6 (ON)
—
8. Jam Display
Location
(Electrical
components)
—
FS-501 B-8
—
Location
(Electrical
components)
—
FS-501 B-4
—
23