Konica Minolta bizhub C250 Service Manual page 387

16. Malfunction code
Code
CC153 ROM contents error upon
startup (PRT)
CC154 ROM contents error upon
startup (PH)
CC163 ROM contents error (PRT)
CD002 JOB RAM save error
CD004 Hard disk access error
CD005 Hard Disk Error 1
CD006 Hard Disk Error 2
CD007 Hard Disk Error 3
CD008 Hard Disk Error 4
CD009 Hard Disk Error 5
CD00A Hard Disk Error 6
CD00B Hard Disk Error 7
CD00C Hard Disk Error 8
CD00D Hard Disk Error 9
CD00E Hard Disk Error A
CD00F Hard disk data transfer error
CD010 Hard disk unformat
CD011 Hard disk specifications error
CD012 Encryption ASIC setting error
CD013 Encryption ASIC mounting error • The faulty of the installation of encrypted ASIC is
CD2XX Trouble related to Security
CDCXX Trouble related to Security
CE001 Abnormal message queue
CE002 Message and Method parameter
failure
CE003 Task error
CE004 Event error
CE005 Memory access error
CE006 Header access error
CE007 DIMM initialize error
CEEE1 MSC undefined malfunction
occurring
344
Item
• A fault is detected in a sequence of ROM contents
check of the Mechanical Control Board (PWB-M)
during starting.
• A fault is detected in a sequence of ROM contents
check of the PH Interface Board (PWB-D) during
starting.
• The wrong model of firmware is detected in the
engine during the initial connection to the engine
is being checked.
• The error in save of JOB data to the Memory/
Hard Disk and its read error are detected.
• Unable to communicate between the hard disk
and MFP Control Board (PWB-MFP).
• Hard disk is faulty.
• Data transfer from the hard disk is faulty.
• Unformatted hard disk is connected.
• A hard disk that falls outside the specifications is
connected.
• Initialization error of the encrypted ASIC is
detected during the machine is starting.
detected during the machine is starting.
• Contact the responsible people of KONIKA
MINOTLTA before taking some countermeasures.
• Contact the responsible people of KONIKA
MINOTLTA before taking some countermeasures.
• MFP Control Board (PWB-MFP) is faulty.
• An undefined malfunction occurs in the MSC of
the MFP Control Board (PWB-MFP).
Field Service Ver. 1.0 Jul. 2005
Description Rank
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
-
-
C
C
C
C
C
C
C