Sensor Check; Check Procedure; Sensor Check List; Sensor Check Screen - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

5. Sensor check

Sensor check

• To allow sensors to be checked for operation easily and safely, data applied to the IC on

the board can be checked on the panel with the main unit in the standby state (including

a misfeed, malfunction, and closure failure condition).

1. Call the Service Mode to the screen.

☞ For details of how to display the Service Mode screen, see the Adjustment/Setting of

the Main Unit Service Manual.

2. Touch the [State Confirmation] key.

3. Touch the [Sensor Check] key.

• This is only typical screen which may be different from what are shown on each individ-

ual main unit.

Field Service Ver. 1.0 Jul. 2005

4061F3E806DA

Table of Contents