Replacing The Pick-Up Roller - Konica Minolta bizhub C250 Service Manual

2. Periodical check
[18]
[16]
[20]
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
2.1.3

Replacing the Pick-up Roller

6
[16]
[17]
4348fs2609c0
[19]
4348fs2610c0
[1]
4348F2C502DA
[3]
[2]
[2]
[2]
4348fs2603c0
Field Service Ver. 1.0 Jul. 2005
11. Remove two E-rings [16] and the
bushing [17], and remove the Pick-
up Roller Fixing Bracket Assy [18].
12. Remove the C-ring [19] and remove
the Paper Take-up Roller [20].
13. Repeat steps 1 to 11 similarly for the
4th Drawer.
1. Remove the Rear Right Cover.
(Remove the Right Lower Cover for
4th row.)
☞ 10
2. Remove the Tray3.(Remove the
Tray4 from 4th row.)
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
☞ See the procedures 1 to 3 in page 3
"Replacing the Separation Roller
Assy."
4. Disconnect the connector [1] and
remove the harness from two wire
saddles.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].