8. Utility Mode
<Detail Setting: POP Before SMTP Time>
Functions
• To set the time necessary for POP Before SMTP Authentication.
Use
• To change the time necessary for POP Before SMTP Authentication.
Setting/
1. Touch [Input].
Procedure
2. Press the Clear key.
3. Enter the time for POP Before SMTP between 0 and 60 using the 10-Key Pad.
(2) E-Mail RX (POP)
<E-Mail RX Setting>
Functions
• To set whether to enable or disable the e-mail reception setting.
Use
• To disable the e-mail reception setting.
Setting/
• The default setting is ON.
Procedure
<POP Server Address>
Functions
• To set the POP Server Address.
Use
• To enter the POP Server Address.
Setting/
• SMTP Server Address Version 4 format
Procedure
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
1. Touch [Host Address].
2. Select [IP Address Input], and enter the IP address.
3. Select [Host Name Input] to enter the host name, and touch [OK].
4. Enter the Login Name (Up to 63 characters).
5. Enter the password (Up to 15 characters).
<Detail Setting: APOP Authentication>
Functions
• To set whether to use APOP Authentication
Use
• To use APOP Authentication
Setting/
• The default setting is OFF.
Procedure
<Detail Setting: Port No.>
Functions
• To set the Port No. for transmitting with POP server.
Use
• To enter the Port No. for transmitting with POP server.
Setting/
1. Press the Clear key.
Procedure
2. Enter the Port No. between 1 and 65535 using the 10-Key Pad.
<Detail Setting: Connection Timeout>
Functions
• To set the timeout period for connection in receiving e-mail to POP server.
Use
• To set the timeout period of connection in receiving e-mail to POP server.
Setting/
• Select the timeout period of connection using +30/-30 keys.
Procedure
• The default setting is 30 sec.
210
"ON"
ON
"30 sec." (30 to 300, in 30 sec. increments)
Field Service Ver. 1.0 Jul. 2005
OFF
"OFF"