14. Mechanical adjustment
4. After the Bypass Paper Size Unit base has been mounted, check that the lever of the
Bypass Paper Size Unit moves smoothly in a manner operatively connected to the
Bypass Guide.
5. Call the Service Mode to the screen and select [Machine] → [Manual Bypass Tray
Adjustment]. Then, carry out Manual Bypass Tray Adjustment.
☞
243
308
3. When the Bypass Paper Size Unit
base is mounted, align the lever
position of the Bypass Paper Size
Unit with the tab at the center in a
straight line.
4038F3C512DA
Field Service Ver. 1.0 Jul. 2005