Display Setting - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 1.0 Jul. 2005

• To set whether to cancel the staple setting when the Staple setting job started and

the next job setting has become available.

• The default setting is OFF.

• To set whether to cancel the Original Set/Bind direction when the job (which original

set/bind direction is set) started and the next job setting has become available.

• The default setting is OFF.

• To set whether to cancel the setting for scanning or transmitting Fax when the scan-

ning is finished or Fax is transmitted, making the next job setting available.

(The address will be cleared even when [OFF] is selected.)

• The default setting is ON.

E. Auto Color Level Adjustment

• To set the criterion level to discriminate between a colored original and a black-and-

white original in the Auto Color mode

• To change the criterion level for the partly colored image to be taken as a black-and-

white original

• Five levels are available to choose from and the default setting is 3.

Display Setting

A. Sub Screen Display ON/OFF

• To set the Sub Screen Display on the control panel.

• To change the Sub Screen Display.

Setting Value : An illustration of the selected key will be displayed

• The default setting is Setting Value.

: The list of job which are being executed will be displayed

"Setting Value"

8. Utility Mode

Table of Contents