Adjustment Of The Document Skew - Konica Minolta bizhub C250 Service Manual

8. Mechanical adjustment
8.3

Adjustment of the document skew

Adjustment standard: Skew should be ± 1.0 % or less with respect to the document length;
[2]
[3]
20
within 3.0 mm for document of A4 size.
[1]
4582fs3508c0
4582fs3511c0
[4]
4582fs3512c0
Field Service Ver. 1.0 Jul. 2005
1. Place the chart furnished with the
Document Feeder in the document
feeding tray [1] (with the side having
an arrow facing up).
2. Set up the following functions:
• Auto Paper
• 1-sided original / 1-side copy
3. Press the Start key.
4. Check in which direction, [2] or [3],
the image tilts on the copy fed out of
the machine.
Specifications: Tilt 3.0 mm max.
• If the image tilts more than the specifi-
cations, perform the following steps to
make the adjustment.
5. Loosen two front screws [4] on the
right hinge.
6. If the image tilts in direction of [2],
move the Document Feeder toward
the front.
If the image tilts in direction of [3],
move the Document Feeder toward
the rear.
7. Tighten two screws [4].
8. Make recheck.