Mechanical Control Board (Pwb-M) - Konica Minolta bizhub C250 Service Manual

6. Other
6.3.14

Mechanical Control Board (PWB-M)

NOTE
• If a Finishing Option is installed, remove if from the main unit before trying to
remove the Mechanical Control Board.
• When removing the Finishing Option, support the Horizontal Transport Unit with
your hand to prevent if from dropping.
[1]
[1]
[1]
[3]
[4]
66
[6]
[7]
[6]
4038F2C055DA
[1]
[1]
[2]
[1]
4038F2C056DB
[3]
4038F2C057DA
Field Service Ver. 1.0 Jul. 2005
10. Unhook six tabs [6], and remove the
Front Cover [7].
1. Remove the Exit Tray.
☞ 57
2. Remove the Rear Left Cover.
☞ 57
3. Remove twelve Screws [1] to remove
the protective sheet of DC Power
Supply [2].
4. Remove the Harness [4] from three
Wire saddles [3].
NOTE
• When installing the Mechanical
Control Board, make sure to fix the
Harness at the original position
with the wire saddle.