Saddle Section; Finisher Tray - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
2.3.10

Saddle Section

[2]
[4]
[6]
[10]
[11]
[12]
2.3.11

Finisher Tray

[1]
[1]
[2]
[5]
[3]
[2]
[1]
4583fs2544c0
[7]
4583fs2518c0
[8]
[9]
4583fs2519c0
[12]
[13]
4583fs2520c0
[2]
[2]
[2]
4583fs2546c0
1. Remove the Front Cover.
☞ 7
2. Remove the Rear Cover.
☞ 7
3. Remove the Punch Dust Box.
4. Open the Jam Access Cover [1],
remove two screws [2], and remove
the Right Stay [3].
5. Remove two screws [4], and remove
the Lever [5].
6. Turn the Folding Jam Release Dial
[6] to move the Paper Pressure [7]
inside.
7. Remove the C-clip [8], and remove
the Belt [9].
8. Disconnect two connectors [10].
9. Remove the Stapler[11].
☞ 10
10. Remove three screws [12], and pull
out and remove the Saddle [13].
1. Remove the Finisher Tray Upper
Cover.
☞ 8
2. Remove the Side Guide.
☞ 9
3. Remove two screws [1],and discon-
nect six connectors [2].
2. Other
11