Konica Minolta bizhub C250 Service Manual page 120

Field Service Ver. 1.0 Jul. 2005
[5]
[7]
[7]
[9]
[10] [9]
6. Disconnect the Connector [4] and
Flat Cable [5].
[4]
4038F2C079DA
7. Remove four Bolts [6] and six
Screws [7], and remove the Interface
cover [8].
[6]
[8]
4038F2C080DA
8. Remove thirteen Screws [9], and
remove the MFP Control Board [10].
NOTE
• When the MFP Control Board is
replaced, mount the removed
NVRAM to the new MFP Control
Board.
• When the MFP Control Board is
replaced, make sure to update the
firmware.
4038F2C081DA
6. Other
77