Dc Power Supply (Pu1) - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
6.3.15

DC Power Supply (PU1)

NOTE
• If a Finishing Option is installed, remove if from the main unit before trying to
remove the DC Power Supply.
• When removing the Finishing Option, support the Horizontal Transport Unit with
your hand to prevent if from dropping.
[1]
[1]
[1]
[3]
[6]
[1]
[1]
[2]
[1]
4038F2C056DB
[3]
[4]
4038F2C062DA
[5]
[6]
4038F2C063DA
1. Remove the Exit Tray.
☞ 57
2. Remove the Rear Left Cover.
☞ 57
3. Remove twelve Screws [1] to remove
the protective sheet of DC Power
Supply [2].
4. Remove five Wire saddles [3] and
the Edge cover [4].
5. Disconnect the Connector [5], and
remove the Harness from three Wire
saddles [6].
6. Other
69