Konica Minolta bizhub C250 Service Manual page 153

6. Other
[25]
[29]
[32]
[31]
[33]
[36]
[35]
110
[26]
[24]
4036fs2566c0
A
B
C
[28]
[27]
4036fs2567c0
[30]
4036fs2568c0
[34]
4036fs2569c0
Field Service Ver. 1.0 Jul. 2005
14. Wind the hook end of the cable [24]
around pulley A [25] and pulley B
[26].
15. Fit the hook end of the cable [27] to
the spring [28] and then hook the
spring to the catch A in the frame.
16. Measure the Spring length, and
check if its length is within the range
of 63.0 mm ± 1 mm.
<When out of the given range>
• In case of 64.1 mm or more:
Retry to put the spring on the catch B.
• In case of 61.9 mm or less:
Retry to put the spring on the catch C.
<Rear>
17. Wind the bead end of the cable [29]
around pulley F [30] and pulley E
[31], then hook the bead [32] onto
the Adjustable Anchor [33].
18. Wind the hook end of the cable [34]
around pulley D [35] and pulley E
[36].