Replacing The Pick-Up Roller - Konica Minolta bizhub C250 Service Manual

2. Periodical check
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
2.1.3

Replacing the Pick-up Roller

[2]
[4]
[5]
6
[16]
[17]
4348fs2508c0
[1]
4348F2C501DA
[3]
[2]
[2]
4348fs2502c0
[4]
4348fs2516c0
Field Service Ver. 1.0 Jul. 2005
12. Remove the C-ring [16] and remove
the Paper Take-up Roller [17].
1. Remove the Rear Cover and the
Rear Right Cover.
☞ 10
2. Remove the Tray 3.
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
☞ See the procedures 1 to 2 in page 3
"Separation Roller Assy."
4. Disconnect the connector [1] from
the Main Control Board.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].
6. Remove two screws [4] and remove
the Paper Separation Roller Mount-
ing Bracket Assy [5] together with
frame.