Mls Qos Srr-Queue Input Cos-Map - Cisco Catalyst 2960 Command Reference Manual

mls qos srr-queue input cos-map

mls qos srr-queue input cos-map
Use the mls qos srr-queue input cos-map global configuration command to map class of service (CoS)
values to an ingress queue or to map CoS values to a queue and to a threshold ID. Use the no form of
this command to return to the default setting.
Syntax Description queue queue-id
cos1...cos8
threshold threshold-id
cos1...cos8
Defaults Table 2-10
Table 2-10
CoS Value
0–4
5
6, 7
Command Modes
Global configuration
Command History Release
12.2(25)FX
Catalyst 2960 Switch Command Reference
2-228
mls qos srr-queue input cos-map queue queue-id {cos1...cos8 | threshold threshold-id
cos1...cos8}
no mls qos srr-queue input cos-map
Specify a queue number.
For queue-id, the range is 1 to 2.
Map CoS values to an ingress queue.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
Map CoS values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
shows the default CoS input queue threshold map:
Default CoS Input Queue Threshold Map
Queue ID - Threshold ID
1–1
2–1
1–1
Modification
This command was introduced.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04