Cisco Catalyst 2960 Command Reference Manual page 463

show parser macro
This is an example of output from the show parser macro name command:
Switch# show parser macro name standard-switch10
Macro name : standard-switch10
Macro type : customizable
macro description standard-switch10
# Trust QoS settings on VOIP packets
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
This is an example of output from the show parser macro brief command:
Switch# show parser macro brief
This is an example of output from the show parser description command:
Switch# show parser macro description
Global Macro(s): cisco-global
Interface
--------------------------------------------------------------
Gi0/1
Gi0/2
--------------------------------------------------------------
This is an example of output from the show parser description interface command:
Switch# show parser macro description interface gigabitethernet0/2
Interface
--------------------------------------------------------------
Gi0/2
--------------------------------------------------------------
Related Commands Command
macro apply
macro description
macro global
macro global
description
macro name
show running-config
Catalyst 2960 Switch Command Reference
2-436
default global : cisco-global
default interface: cisco-desktop
default interface: cisco-phone
default interface: cisco-switch
default interface: cisco-router
customizable : snmp
Macro Description(s)
standard-switch10
this is test macro
Macro Description
this is test macro
Description
Applies a macro on an interface or applies and traces a macro on an interface.
Adds a description about the macros that are applied to an interface.
Applies a macro on a switch or applies and traces a macro on a switch.
Adds a description about the macros that are applied to the switch.
Creates a macro.
Displays the current operating configuration, including defined macros. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04