Cisco Catalyst 2960 Command Reference Manual page 295

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Switch(config-if)# srr-queue bandwidth share 30 20 25 25
Switch(config-if)# no priority-queue out
You can verify your settings by entering the show mls qos interface interface-id queueing or the show
running-config privileged EXEC command.
Related Commands Command
show mls qos interface
srr-queue bandwidth shape
srr-queue bandwidth share
OL-8604-04
Description
queueing Displays the queueing strategy (SRR, priority queueing), the
weights corresponding to the queues, and the
CoS-to-egress-queue map.
Assigns the shaped weights and enables bandwidth shaping on
the four egress queues mapped to a port.
Assigns the shared weights and enables bandwidth sharing on
the four egress queues mapped to a port.
Catalyst 2960 Switch Command Reference
priority-queue
2-269