Debug Ip Igmp Snooping - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug ip igmp snooping

Use the debug igmp snooping privileged EXEC command to enable debugging of Internet Group
Management Protocol (IGMP) snooping activity. Use the no form of this command to disable debugging.
Syntax Description
group
management
querier
router
timer
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug ip igmp snooping command is the same as the no debug ip igmp snooping command.
Related Commands Command
debug platform ip
igmp snooping
show debugging
OL-8604-04
debug ip igmp snooping [group | management | querier | router | timer]
no debug ip igmp snooping [group | management | querier | router | timer]
(Optional) Display IGMP snooping group activity debug messages.
(Optional) Display IGMP snooping management activity debug messages.
(Optional) Display IGMP snooping querier debug messages.
(Optional) Display IGMP snooping router activity debug messages.
(Optional) Display IGMP snooping timer event debug messages.
Modification
This command was introduced.
Description
Displays information about platform-dependent IGMP snooping activity.
Displays information about the types of debugging that are enabled.
debug ip igmp snooping
Catalyst 2960 Switch Command Reference
B-15