Mls Qos Map - Cisco Catalyst 2960 Command Reference Manual

mls qos map

mls qos map
To use this command, the switch must be running the LAN Base image.
Note
Use the mls qos map global configuration command to define the class of service
(CoS)-to-Differentiated Services Code Point (DSCP) map, DSCP-to-CoS map, the
DSCP-to-DSCP-mutation map, the IP-precedence-to-DSCP map, and the policed-DSCP map. Use the
no form of this command to return to the default map.
Syntax Description cos-dscp dscp1...dscp8
dscp-cos dscp-list to
cos
dscp-mutation
dscp-mutation-name
in-dscp to out-dscp
ip-prec-dscp
dscp1...dscp8
policed-dscp dscp-list
to mark-down-dscp
Catalyst 2960 Switch Command Reference
2-214
mls qos map {cos-dscp dscp1...dscp8 | dscp-cos dscp-list to cos | dscp-mutation
dscp-mutation-name in-dscp to out-dscp | ip-prec-dscp dscp1...dscp8 | policed-dscp dscp-list
to mark-down-dscp}
no mls qos map {cos-dscp | dscp-cos | dscp-mutation dscp-mutation-name | ip-prec-dscp |
policed-dscp}
Define the CoS-to-DSCP map.
For dscp1...dscp8, enter eight DSCP values that correspond to CoS values 0
to 7. Separate each DSCP value with a space. The range is 0 to 63.
Define the DSCP-to-CoS map.
For dscp-list, enter up to eight DSCP values, with each value separated by a
space. The range is 0 to 63. Then enter the to keyword.
For cos, enter a single CoS value to which the DSCP values correspond. The
range is 0 to 7.
Define the DSCP-to-DSCP-mutation map.
For dscp-mutation-name, enter the mutation map name.
For in-dscp, enter up to eight DSCP values, with each value separated by a
space. Then enter the to keyword.
For out-dscp, enter a single DSCP value.
The range is 0 to 63.
Define the IP-precedence-to-DSCP map.
For dscp1...dscp8, enter eight DSCP values that correspond to the IP
precedence values 0 to 7. Separate each DSCP value with a space. The range
is 0 to 63.
Define the policed-DSCP map.
For dscp-list, enter up to eight DSCP values, with each value separated by a
space. Then enter the to keyword.
For mark-down-dscp, enter the corresponding policed (marked down) DSCP
value.
The range is 0 to 63.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04