Debug Spanning-Tree Bpdu-Opt - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug spanning-tree bpdu-opt

Use the debug spanning-tree bpdu-opt privileged EXEC command to enable debugging of optimized
spanning-tree bridge protocol data units (BPDUs) handling. Use the no form of this command to disable
debugging.
Syntax Description
detail
packet
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug spanning-tree bpdu-opt command is the same as the no debug spanning-tree bpdu-opt
command.
Related Commands Command
show debugging
show spanning-tree
OL-8604-04
debug spanning-tree bpdu-opt [detail | packet]
no debug spanning-tree bpdu-opt [detail | packet]
(Optional) Display detailed optimized BPDU-handling debug messages.
(Optional) Display packet-level optimized BPDU-handling debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays spanning-tree state information.
debug spanning-tree bpdu-opt
Catalyst 2960 Switch Command Reference
B-61