Cisco Catalyst 2960 Command Reference Manual page 300

radius-server dead-criteria
Related Commands Command
dot1x critical (global configuration)
dot1x critical (interface
configuration)
radius-server retransmit retries
radius-server timeout seconds
show running-config
Catalyst 2960 Switch Command Reference
2-274
Chapter 2
Description
Configures the parameters for the inaccessible authentication
bypass feature.
Enables the inaccessible authentication bypass feature on an
interface and configures the access VLAN to which the switch
assigns the critical port when the port is in the
critical-authentication state.
Specifies the number of times that the switch tries to reach the
RADIUS servers before considering the servers to be
unavailable. For syntax information, select Cisco IOS Security
Command Reference, Release 12.2 > Server Security
Protocols > RADIUS Commands.
Specifies the time in seconds during which the switch waits for
a RADIUS server to respond before the IEEE 802.1x
authentication times out. For syntax information, select Cisco
IOS Security Command Reference, Release 12.2 > Server
Security Protocols > RADIUS Commands.
Displays the running configuration on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management
Commands > Configuration File Management Commands.
Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04