Cisco Catalyst 2960 Command Reference Manual page 487

show vlan
Examples
This is an example of output from the show vlan command.
Switch> show vlan
VLAN Name
---- -------------------------------- --------- -------------------------------
1
<output truncated>
2
3
<output truncated>
1000 VLAN1000
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1
2
3
<output truncated>
1005 trnet 101005
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type
------ --------- ----------------- ------------------------------------------
Table 2-30
Field
VLAN
Name
Status
Ports
Type
SAID
MTU
Parent
RingNo
Catalyst 2960 Switch Command Reference
2-460
default
VLAN0002
VLAN0003
SAID MTU
enet 100001 1500
enet 100002 1500
enet 100003 1500
1500
show vlan Command Output Fields
Description
VLAN number.
Name, if configured, of the VLAN.
Status of the VLAN (active or suspend).
Ports that belong to the VLAN.
Media type of the VLAN.
Security association ID value for the VLAN.
Maximum transmission unit size for the VLAN.
Parent VLAN, if one exists.
Ring number for the VLAN, if applicable.
Status Ports
active Gi0/1, Gi0/2, Gi0/3, Gi0/4
Gi0/5, Gi0/6, Gi0/7, Gi0/8
Gi0/9, Gi0/10, Gi0/11, Gi0/12
Gi0/13, Gi0/14, Gi0/15, Gi0/16
active
active
active
active
active
active
active
Parent RingNo BridgeNo Stp
- - -
- - -
- - -
- - -
Ports
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Table 2-30 describes the fields in the display.
BrdgMode Trans1 Trans2
- - 1002 1003
- - 0 0
- - 0 0
ibm - 0 0
OL-8604-04