Debug Qos-Manager - Cisco Catalyst 2960 Command Reference Manual

debug qos-manager

debug qos-manager
Use the debug qos-manager privileged EXEC command to enable debugging of the quality of service
(QoS) manager software. Use the no form of this command to disable debugging.
Syntax Description
all
event
verbose
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug qos-manager command is the same as the no debug qos-manager command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-56
debug qos-manager {all | event | verbose}
no debug qos-manager {all | event | verbose}
Display all QoS-manager debug messages.
Display QoS-manager related-event debug messages.
Display QoS-manager detailed debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04