Show Mac Address-Table - Cisco Catalyst 2960 Command Reference Manual

show mac address-table

show mac address-table
Use the show mac address-table user EXEC command to display a specific MAC address table static
and dynamic entry or the MAC address table static and dynamic entries on a specific interface or VLAN.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)FX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table command:
Switch> show mac address-table
------------------------------------------
Vlan
----
All
All
All
All
All
All
All
All
All
All
All
1
Total Mac Addresses for this criterion: 12
Catalyst 2960 Switch Command Reference
2-390
show mac address-table [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0000.0000.0001 STATIC
0000.0000.0002 STATIC
0000.0000.0003 STATIC
0000.0000.0009 STATIC
0000.0000.0012 STATIC
0180.c200.000b STATIC
0180.c200.000c STATIC
0180.c200.000d STATIC
0180.c200.000e STATIC
0180.c200.000f STATIC
0180.c200.0010 STATIC
0030.9441.6327 DYNAMIC
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Ports
-----
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
Gi0/4
OL-8604-04